Our Services

Oilfield Services: Production Services

Rental Tools

Open Hole Lubricator Package

  • 5-1/2" 5,000 PSI
  • 9-5/8" 5,000 PSI5/8" 5,000 PSI
  • 13-3/8" 3,000 PSI

 

Used to run open hole logging tools into well during and after drilling and before running casing to determine well conditions with little or no expected pressure on well.

Standard Service Lubricator Packages Cased Hole

  • 2-1/2" 5,000 PSI
  • 2-1/2" 15,000 PSI
  • 3" 5,000 PSI
  • 3" 10,000 PSI
  • 2-1/2" 10,000 PSI
  • 5-1/2" 10,000 PSI (4.675" ID)

 

Used to run cased hole tools into well after running casing to determine well conditions with expected pressure on well. This will be used for logging, perforating, plugging, fishing and work over with no H2S or CO2 present.

H2S Service Lubricator Packages Cased Hole

  • 2-1/2" 10,000 PSI
  • 2-1/2" 15,000 PSI
  • 3" 10,000 PSI
  • 3-1/16" 15,000 PSI
  • 5-1/2" 10,000 PSI
  • 4-1/16" 10,000 PSI
  • 7-5/8" 10,000 PSI
  • 4-1/16" 15,000 PSI
  • 5-1/8" 15,000 PSI

 

Used to run cased hole tools into the well after running casing to determine well conditions with expected pressure on well. This will be used for logging, perforating, plugging, fishing and work over with any H2S or CO2 present.

Lubricator Rig Up with Grease Injection
Grease injection is used to control well pressure at surface to allow intervention. Grease is pumped into a series of flow tubes at a determined pressure that is greater than well pressure to create a liquid seal on the wireline.

Flow Back Packages
Flow back flow iron is used to direct fluids going into and out of the well while controlling pressure. Used in coiled tubing applications and general flow back to clean up the well, the fluid is directed through a choke and into a rig tank or frac tank.

Flow Back Iron Packages

  • 2" 15,000 PSI Standard Service packages with adjustable dual choke manifold
  • 2" 15,000 PSI H2S Service package with positive or adjustable dual choke manifold
  • 3" 15,000 PSI H2S Service package with adjustable dual choke manifold

 

Pumps and Pump Trucks
Our pumps range from 5,000 to 15,000 PSI working pressure with a range of fluid rates (GPM). They are used to test lubricator, tubing, casing, pipelines and transfer fluids.

Pumps

Hydraulic Test Pumps

  • HP 550 15,000 PSI (.25 BPM)
  • HP 550 8,000 PSI (.50 BPM)
  • HP 950 6,000 PSI (1 BPM)
  • (Some air operated pumps are available)

 

High Volume Pumps

  • PE 5,000 PSI
  • TEE 5,000 PSI
  • SPM 10,000 PSI
  • MSI 15,000 PSI Double Pumper
  • SPM 15,000 PSI
  • OPI 15,000 PSI

 

Tanks
22 Bbl to 105 Bbl some with hydraulic blenders and 300 Bbl open top with dual gas busters, walkways and rolling axles (frac tank design).

Miscellaneous

  • Crane Trucks
  • Light Plants
  • Generators 17kw
  • Man Lifts
  • Centrifugal and Diaphragm Pumps
  • Fishing Kits
  • Pipe Recovery Tools
  • Gas Busters
  • Spools and Adapters
  • Filter Pods
  • Air Compressors
  • Gate Valves
  • Mini Shaker Systems

 


[ Privacy ]